Product Description:
The handheld laser welding machine is a new type of welding method, mainly for the welding of thin-walled materials and precision parts. It can realize spot welding, butt welding, overlap welding, sealing welding, etc., the width of the weld is small, the heat affected zone is small, Small deformation, fast welding speed, smooth and beautiful welding, no need to handle or simple treatment after welding, high quality of welding seam, no porosity, precise control, small focus photoelectricity, high positioning accuracy, easy to realize automation.
Features:
1. The welding speed is fast, 2-10 times faster than traditional welding. One machine can save at least 2 welders a year.
2. The operation mode of the handheld welding gun head enables the workpiece to be welded at any position and at any angle.
3. No need for welding table, small footprint, diversified welding products, and flexible product shapes.
4. Low welding cost, low energy and low maintenance cost.
5. Beautiful welding seam: the welding seam is smooth and beautiful without welding scars, the workpiece is not deformed, and the welding is firm, reducing the follow-up grinding process, saving time and cost.
6. No consumables: laser welding without welding wire requires less consumables, longer life, safer and more environmentally friendly.
型号 Model | LS-PW-500 | LS-PW-1000 | LS-PW-1500 | LS-PW-2000 |
激光功率 Laser power | 500W | 1000W | 1500W | 2000W |
工作模式 Working mode | 连续或调制 Continuous or modulate | |||
激光波长 Laser wavelength | 1064NM | |||
光束质量 Beam quality | M2<1.1 | M2<1.2 | M2<1.2 | M2<1.5 |
输出功率稳定度 Standard output laser power | ±2% | ±2% | ±2% | ±2% |
电力要求 Power supply | AC220V±10% 50/60Hz | AC220V±10% 50/60Hz | 380V±10% 3P+PE | 380V±10% 3P+PE |
整机功率 Power | ≤5KW | ≤7KW | ≤9KW | ≤12KW |
冷却系统 Cooling system | 定制型工业级双温双控冷水机组 Customized Industrial Double Temperature and Double Control Chiller | |||
光纤长度 Fiber length | 5M-10M可定制 Customizable | |||
工作环境温度范围 Temperature range of working environment | 15~35 ℃ | |||
工作环境湿度范围 Humidity range of working environment | < 70%无凝露 < 70%No condensation | |||
焊接厚度范围 Welding thickness range | MAX1mm | MAX2mm | MAX3mm | MAX5mm |
适用材料 Applicable materials | 碳钢、不锈钢、镀锌板等 Carbon steel、stainless steel、galvanized sheet, etc | |||
焊缝要求 Weld requirements | <0.2mm | |||
焊接速度 Welding speed | 0~120 mm/s |
Welding penetration
Laser Power | Stainless Steel | Carbon steel | Galvanized sheet |
1000W | 0.5-1.5mm | 0.5-1.5mm | 0.5-1.2mm |
1500W | 0.5-3mm | 0.5-3mm | 0.5-2.5mm |
Boot-up workflow
1. Confirm that the external contact is normal, and open the rear of the device without opening;
2. Check whether the emergency stop switch is open normally. After confirming the switch, turn on the key switch, and then the machine power indicator will light up;
3. Confirm that if the equipment is normally powered on at this time, check whether the chiller works normally, check whether the water channel of the equipment is normal, if there is water leakage or the chiller is not working, please cut off the power and check;
4. Start the laser and select the external control mode (the specific way depends on different laser brands, if there is any difference, please consult the relevant technical personnel before starting the laser for the first time);
5. After the end of the laser self-test process (the laser self-test process is about 30 seconds, please wait patiently), you can operate the touch screen on the device;
6. Adjust parameter No. 1 on the touch screen to the welding requirement, click "Start" on the interface, then connect the protective ground clamp to the welding product, and the welding can be carried out through the touch button on the handgun;
7. During working and stop working, please note that the optical fiber is not bent by more than 60 degrees, and the extra optical fiber is hung on the optical fiber bracket;
8. When working, take it out from the hand-held welding gun rack. When working or suspended, please hang the welding gun on the bracket to avoid unnecessary losses.