Views: 0 Author: Site Editor Publish Time: 2022-01-19 Origin: Site
Automatic laser welding machine is a precision equipment, in daily use, do a good job of laser equipment maintenance is particularly important. About maintenance, first of all, special attention should be paid to the use of automatic laser welding machine, such as internal or external joint terminal inspection, must be turned off after the power switch can be implemented.
Automatic metal laser welding machine manual operation and daily maintenance
1. Perform regular testing. For example, check whether the rotation of the cooling fan is smooth when the automatic laser welding machine is energized; Whether abnormal vibrations, sounds and smells occur; Whether the gas leaks; Whether the joints and insulation of the welding wire are loose or peeling; Whether there is abnormal heating phenomenon of welded cables and wiring parts, etc.
2, because the welding machine is forced air cooling, it is easy to inhale dust from around and accumulate in the machine. Therefore, we can regularly use clean and dry compressed air to blow away the dust inside the welding machine. In particular, transformer, reactance coil and coil volume gap and power semiconductor parts should be especially clean.
3. Check the wiring position of welding machine power wiring regularly. Whether the wiring screws of the terminals such as the input side and output side, the wiring parts of the external wiring, the wiring parts of the internal wiring and other parts are loose, rust should be removed to make the contact conductive good.