Product Advantages:
● Energy, pulse width, frequency and focus can be adjusted within a wide range to achieve different welding effects.
● Ceramic reflector used in the laser pump chamber is imported, which is corrosion resistant, high temperature resistant, high electrical/optical conversion.
● World-leading automatic light shielding system is employed to remove harmful lighting on eyes during operation.
● 24-hour continuous operation, with stable operating performance,
● Free of maintenance within 10000 hours.
● Personalized design in compliance with ergonomics principles.
Application:
This system is especially suitable in the jewelry industry. There is no special block needed during the processing. The pieces to be processed can be hold by hand, and to be welded under the microscope conveniently.
Datas：
Laser Source | Nd3:YAG |
Wavelength | 1064nm |
Pulse frequency | 150Hz adjustable |
Pulse width | 1.5~20ms adjustable |
Single pulse Energy | 60J |
Rated Laser Power | 200W |
Cover Gas Channel | 1 line quick connection |
Focused Beam Diameter | 0.13mm |
Expanding Ratio | 3X |
Microscope Ratio | 10X |
Focal Length | 100mm |
Power Supply | Single phase AC 220V10 |
Power consumption | 6kw |
Running Environment | Temperature 5℃30℃, humidity < 85% |
Continuous Working Time | 24 hrs |
Shield Gas Connection | 1 line quick connection (argon) |
Samples
Product Advantages:
● Energy, pulse width, frequency and focus can be adjusted within a wide range to achieve different welding effects.
● Ceramic reflector used in the laser pump chamber is imported, which is corrosion resistant, high temperature resistant, high electrical/optical conversion.
● World-leading automatic light shielding system is employed to remove harmful lighting on eyes during operation.
● 24-hour continuous operation, with stable operating performance,
● Free of maintenance within 10000 hours.
● Personalized design in compliance with ergonomics principles.
Application:
This system is especially suitable in the jewelry industry. There is no special block needed during the processing. The pieces to be processed can be hold by hand, and to be welded under the microscope conveniently.
Datas：
Laser Source | Nd3:YAG |
Wavelength | 1064nm |
Pulse frequency | 150Hz adjustable |
Pulse width | 1.5~20ms adjustable |
Single pulse Energy | 60J |
Rated Laser Power | 200W |
Cover Gas Channel | 1 line quick connection |
Focused Beam Diameter | 0.13mm |
Expanding Ratio | 3X |
Microscope Ratio | 10X |
Focal Length | 100mm |
Power Supply | Single phase AC 220V10 |
Power consumption | 6kw |
Running Environment | Temperature 5℃30℃, humidity < 85% |
Continuous Working Time | 24 hrs |
Shield Gas Connection | 1 line quick connection (argon) |
Samples
