3w Fully enclosed type Ultraviolet laser marking machine
You are here: Home » Products » laser marking machine » UV laser marking machine » 3w Fully enclosed type Ultraviolet laser marking machine

Contact Us

35
   0086-15927602429
 No.4, Floor 6,Unit 2,Building 1,Liming Electromechanical Industrial Park Phase II,Changzui village, canglong island, jiangxia district, wuhan ,HUBEI province,China.
 

3w Fully enclosed type Ultraviolet laser marking machine

UV laser with short wavelength,focus,smaller spot,belongs to cold process with a little heat affecting,good beam quality, it can achieve hyperfine marking.Most materials can absorb ultraviolet laser,it is widely applied on industries; with very little heat affecting area, it won't have heat effect,there is no burning problem,pollution-free,non-toxic,high marking speed,high efficiency,the machine performance is stable,low power consumption.
Availability:
  • LS-UVDBD-3/5/12
  • Infni laser

Product Introduction

UV laser with short wavelength,focus,smaller spot,belongs to cold process with a little heat affecting,good beam quality, it can achieve hyperfine marking.Most materials can absorb ultraviolet laser,it is widely applied on industries; with very little heat affecting area, it won't have heat effect,there is no burning problem,pollution-free,non-toxic,high marking speed,high efficiency,the machine performance is stable,low power consumption.

 

Application:

 

Applicable for all metals, ceramics, plastic making industry, packing&decoration industries,

 

mobile communications, glass crafts advertising and other manufacturing industries.

 

Holy Laser sandblasting machine is mainly used in Ultra-fine processing of high-end market field,

 

such as jewelry, package of cosmetic bottle surface, Soft pcb board, wire glass, mobile phone spare parts (like plastic keys),

 

sandblasting in crystal beads, ceramics surface marking, quartzite in the back of the clock.

 

Main Features

(1) Adopting doubling technique of intravenous frequency has greatly improve the stability of laser. Design on laser cavity adopts a series of optimization method, so as to ensure the beam quality as the fundamental mode.

 

(2) The machine takes 355nm pumped purple light laser device as the light source. Narrower pulse width and smaller heat affection contribute to generate peak power. The higher the peak power is, the wider the adapting range of materials is. This implement perfect printing in some relatively hard material.

 

(3) Higher pulse stability, namely better pulse consistency of laser produces the same carving effect, so it’s very suitable for precision marking. Higher pulse repetition frequency meets the need of quick marking and high production efficiency.

 

(4) High efficiency of the photoelectric conversion and long service life.

 

(5) Automatic in a rotary table (optional item), convenient feeding, fast speed, high efficiency.

 

(6) The mark is of environmental protection, comply with RoHS standard.

 

(7) It can support logos and graphs designed in DXF format from Auto-CAD, PLT, BMF, AI, JPG, etc.

 

(8) It can mark date, bar code and two-dimension code automatically.

 

(9) Superior performance, good stability, high conversion rate and low energy consumption.

 

Samples

 



laser marking machine
laser marking machine


Our company




Our Service


After sales service
24 hours technical support by Email or Calling.
# Hardware: 1 years on all parts and labor.
# Software: Whole life on update for free.
# Maintenance and technological support: Whole life.
Quality control
# Strict control machine assembly each link, ensure the machine clean and beautiful.
# 48 hours continuous working before the machine leaving factory, ensure the high quality of each machine.
Warranty
# 1 years guarantee of the whole machine (excluding Artificial damage)
# we have sincere raw material suppliers, all of our raw material are original, not copy.
# Every machine must be tested before delivery for 8 hours, all of them are absolutely qualified.
# Main parts(excluding the consumables) shall be changed free of charge if there is any problem during the warranty period.

FAQ


Q: How to Install the machine     

A: After receive our machine, customers do not need to install it and can use it directly.


Q: How to operate the machine? is training necessary?  

A: The machine is mainly controlled by software. It's very easy, not complicated. Before shipment, we will make a simple operation manual with pictures and provide user manual of software. Generally speaking, an operator, who is not familiar with fiber laser marking machine before can still operate it very well. According to customers' requests, we can send our technician to customer' plant for machine training or customers can come to our plant for machine training if needed.


Q: What's package?
A: We have 3 layers package. For the outside, we adopt plywood case. In the middle, the machine is covered by foam, to protect the machine from shaking. For the inside layer, the machine is covered by waterproof plastic bag.

Q: What's delivery time?
A: Generally speaking, lead time is 5-7 working days after receive the payment.

Q: Can we add a protection cover?
A: Yes, we can add a protection cover if you need. We can customize the design as customers' requests.


Previous: 
Next: 
Product Inquiry

 

Infinite (wuhan) laser S&T CO. LTD, formerly known as Wuhan LS Photoelectric Technology Co., Ltd., 

CONTACT US

  0086-15927602429
   0086-15927602429
 
lucy@infnilaser.com
  No.4, Floor 6,Unit 2,Building 1,Liming Electromechanical Industrial Park Phase II,Changzui village, canglong island, jiangxia district, wuhan ,HUBEI province,China.

QUICK LINKS

QUICK LINKS

CONSULTATION

Contact us
 © 2020 MEDICA . All rights reserved.Support by leadong  鄂ICP备2021000636号-1