Infni laser
YX-01 Laser printing control system operation manual
1.Painting interface
1.1 File operation
| save |
| Save as |
| open |
| create a new file |
| Into hibernation, then click the screen to wake up. (Note: it is not off state) |
| Undo |
| reduction | Laser control card related parameter setting. |
1.2 Zoom bar
| Zoom in the contents of the view area |
| Reduce the size of the view area |
Revert to the view's original area
| Enter the system settings interface | ||
Start red light, preview the graphics. |
1.3 Toolbar
Make tools
| Click the text to select text, time, date, serial number and other new. |
| PLT vector file import |
| Barcode generation tools |
| Edit barcode attributes |
| Text content editing |
| delete |
| Edit page object list |
| Coding delete, copy, copy files by clicking on the management. |
Operating tools
| rotate to the left |
| rotate to the left |
| Move up |
| Move Downward |
| move to the left |
| move to the right |
| mobile |
| Select graphics, click copy, then click on the blank space, copy the same graphics. |
| Multiple choice graphics |
| Select all graphics |
| Fill the graphic settings |
|
Scale bar
| Height adjustment |
| Width adjustment |
| Character radian adjustment |
| Lock solution or open, corresponding to the same regulation xy, and were adjusted. |
| Adjust the accuracy of the operation |
1.4 Object list
Conversion function：When some texts overlap or a text is not in the view area，click conversion button into the area where the text is in and select the text.
1.5 Text editing sub interface
Text editing interface: Text content display, text segment list, function keys.
Text content display bar: Displays the list of input texts.
Font selection:
Font height, spacing, line spacing, coordinate center information editing:
Function keys:
: Insert fixed text.
：Insert the date text.
：Insert time text.
: Insert the serial number text.
: Insert txt file.
: Edit serial communication files.
: Edit shift information file.
:Use the line feed button to edit multi-segment text, use the text to select a line feed, and click the linefeed button.
:Cancel the newline.
:The selected text segment moves up.
:The selected text segment moves down.
:Modify the currently edited text segment
:Delete the currently edited text segment.
:Save the current edited text, and exit the current interface
：Cancel the current edit text, exit the current interface.
Keyboard input method:
：Enable English capital input.
:Enable English input.
：Enable pinyin input.
: Enable figures, punctuation input.
1.3 Font preview selection interface
Font preview selection interface, you can preview the font selection font is asfollows:
Select the file in the drawing interface, click the Font icon, enter the font library.
1.6 date editor sub-interface
The system supports multiple formats of date and time, the list box lists the date of various formats to choose from, if the user needs to set their own format, first select a column, and then click edit to modify their format.
Date Offset: How many days to offset from the current time. If the current time is 2014/7/28, enter 2
Time content will become 2014/7/30.
1.7 serial number editing sub interface
Digit： digit of serial number. For input 3，then the content of serial number is XXX. The system default is 3 digits. Original value: original value of serial number.
Step size direction：used in setting counting sequences. for example 1 represents the increment of 1，-1 represents the decrement of 1.
Current value: The value of the current to paint.
Fill: input number fill character. The default value is zero fill characters. for example, the fill is 0，current value is 1，then the painting result is 001.
Stop value：The final painting number.
Repeat: The number of repeat numbers，The default value is 0，which represents the number of painting is 1. The value is 1，which represents the number of painting is 2.
duplicate value: Representing how many times the number painting. User can set the value and restart.
Cycle: checked represent the painting is over and restart painting.
Cancel the prefix：Banning the use of filling symbols. for example, edit a three digit number 000, after checking cancel the prefix，the value of painting become 0.
1.8 Save file interface
When creating the document text, you need to tick the text box.
Click the Browse button to select the desired txt file. Currently only supports * .txt format text file.
The end of the file to start again: Coding code to the end of the file, will read the beginning of the file coding.
End of the file to stop marking: Coding to the last line of the file will not start over.
Start line: start from the current line Coding, Coding can also be used before the query for progress.
1.9 Save file interface
By selecting the top button，user can save file in the internal storage，SD card，USB storage
1.91 Code39 editing sub interface
Code39 is consist of Arabic numerals. Interface is mainly aimed at the width of the barcode height and margin Settings. The margin in the case of reverse is effective. In order to bring out, some color material need to select reverse painting.
1.92 Code128 setting sub interface
Code128 possess character set，A,B,C。A character set is for Numbers, uppercase letters, and some special characters. B character set include digital, lowercase letters, and some special characters. C only include digital character set, but compress coding width. It is recommended to use the Auto, which is optimal compression bar code.
1.93 QR setting sub interface
QR codeis consist of mask, model, error correction. Bitmap print QR code currently supported.
Cell Width： A unit takes up a square side length.
Proportional Circle： In the area of occupied by printing.
Outer Ring Number: In reverse, the outer ring takes up the number of turns.
Count： The number of painting small round.
2 Printing interface
Button Description:
Start button, there must be a text segment, click on the effective
Printing , otherwissse button action is prohibited.
:Manual printing button. In the code running state, click the code button. click once at a time.
:Control card related parameters Settings.
: get rid of the serial number count.
：Adjust the content of working conditions
：Adjust the parameters under working conditions
2.1 control card Settings interface
2.2.1Printing parameters
Jumper Speed: The galvanometer rotational speed when jumping.
Mark Speed: The galvanometer rotational speed when bright dipping
Power：Laser output power when printing. The greater the power, the deeper the dozen.
Frequency： Laser light frequency. The greater the frequency，the better The consistency of line.
Laser On Delay: Adjust system by starting movement until the end of the laser with time lag。Time is too short - line beginning place without marking。Time is too long - line at beginning of marking is too heavy.
Laser Off Delay：Adjust the system at the end of the laser, movement to the end of time。Time is too long - line ends of marking is too heavy。Time is too short - line ends place without marking。
Poloygon：Adjusting system When turn the time lag of。Time is too short - Angle becomes arc shape. Time is too long - corner will marking is too heavy。
Matrix Delay： When selecting a bitmap fonts, delay time of each printing point. the longer the time, the more heavy the marking
Set Default： Set the default printing parameters, click save
Use Default: export the default parameters had been set up
Assembly line direction: there are two set of assembly line direction At present:from left to right or from right to left. If encounter in the Y direction , it can be solved by axis transformation.
flight parameters with encoder and flight parameters (simulated flight) without encoder.
Simulation：Check represents the flight mode without encoder. Otherwise, represent external encoders
Velocity(mm/s)：Running speed of belt pulley. For example, 1000 represents running speed of 1000mm/s.
For example, the running speed of belt pulley is 20m/min, then converted to 1 s for 667 mm/s.
mm/plus： the length of Each pulse， unit is mm
Diameter： diameter of the scroll wheel.mm
Pulse Count: One revolution of the encoder pulse number.
Calculate：According to the current pulse number, diameter to calculate the product value when clicked.
Encoder Test： display the number of pulses of encoder .
2.2.3optical paramete
XY Axis transform：change the physical output.
X aixs inversion: the mirror of X axis .
Y aixs inversion： the mirror of Y axis.
size：The size range output of the output field ，70mm represents 70x70.
rect：The size of a square output for debugging.
Correction includes bucket，rhombus， trapezoid，and proportion correction.
proportion correction generally is ok in the printing machine. The method of proportion correction as follows:
1, Set the size in focal length size interface
2, Set the size of marking the square to 20mm.
3, Enter the code interface，Check the square in advanced options interface.
4, Start printing, print the square.
5, Measuring the square X, Y axis length are 25,25, respectively, then The proportion coefficient of the X axis is 20/25, The proportion coefficient of the Y axis is 20/25
1.
2.2.4Laser
Laser Settings include optical fiber and CO2 laser.
CO2 laser settings include first pulse preionization and inhibition. The first pulse suppression is in the presence of focused
IPG laser settings include startup latency and frequency limits.
2.2.5external triggering
External trigger must be checked on the software to take effect.
There are two kinds of external trigger delay model: Time delay and pulse delay. Can not choose the pulse mod without encoder
notice：1000000us is equal to 1second.
2.2.6Printing mode
Pipeline: In the mode of production or cable，the pipeline mode need to be checked.
Pipeline distance: How many mm every printing again.
start point of long character : In the case of characters long flight，the starting point of the galvanometer is in middle position coordinates. The deviation can be modified by setting the starting position.
Use Square：Only for the printing square and other text are ignored when selected. mainly used for size and the number of product testing.
3. setting interface
3.1 system setting interface
Date/time：Adjust the system time .
correction of touching screen：Correction of touch screen function. If the touch screen is not accurate, enter the calibration interface to recalibrate.
file management：The code file to delete, copy, copy by clicking on the file management to enter.
version： Check the system software version, convenient maintenance
update： Update Software.
Startup Picture： user can update their boot LOG.
4system setting.
4.1 System initialization.
1. Choose the right type of laser. setting interface-control card-laser.
2. Set the size of the optics. set-optics- Focal length size interface.
3. Detection of X, Y axis is correct or not. Editing a text”ABC”, then set correctly in optics-axis transformation
5.2 Normal flight initialization Settings
1. First, check or uncheck simulated flight and uncheck the encoder. setting-control card-marking on the fly
2. Set the size of the marking on the square. set-optics- Focal length size interface.
3. Check the square，In the printing interface of advanced options.
4. Choose the direction of the pulley，From left to right or from right to left. In the printing interface of advanced options.
5. Select normal flight. In the printing interface of advanced options.( If have a photoelectric, select external trigger)
6.printing，According to the square of the closed situation, adjust the product number or simulation speed. set-control- marking on the fly.
If square overlap is more, the accumulation and simulation speed decrease. If the square is not closed, the accumulation and simulation speed decrease
5.3 use of the long characters.
1. First, adjust simulation speed and product according to 5.2
2. Editing a text or a few piece of text. Text content can be present within the scope of the mirror, can also be outside the scope.
3. choose long flight characters In the printing in the advanced options. in the process of printing，adjust the starting position of the characters if not gush out. set-control card- Long character starting position. adjust the spacing between characters if speed is too fast.
5.4 use of meter mark.
1.First, adjust simulation speed and product according to 5.2
2.Create a text as shown below (Contains the serial number and fixed character "m"):
3.Enter the printing interface，choose long flight characters. Then select the assembly line direction.
4. Enter the set interface，pipeline mode of marking mode in control card setting. Pipeline spacing is 1000mm
5. Enter the printing interface，The status bar displays as follows:
6. Start printing.
Q: How to Install the machine
A: After receive our machine, customers do not need to install it and can use it directly.
Q: How to operate the machine? is training necessary?
A: The machine is mainly controlled by software. It's very easy, not complicated. Before shipment, we will make a simple operation manual with pictures and provide user manual of software. Generally speaking, an operator, who is not familiar with fiber laser marking machine before can still operate it very well. According to customers' requests, we can send our technician to customer' plant for machine training or customers can come to our plant for machine training if needed.
Q: What's package?
A: We have 3 layers package. For the outside, we adopt plywood case. In the middle, the machine is covered by foam, to protect the machine from shaking. For the inside layer, the machine is covered by waterproof plastic bag.
Q: What's delivery time?
A: Generally speaking, lead time is 5-7 working days after receive the payment.
Q: Can we add a protection cover?
A: Yes, we can add a protection cover if you need. We can customize the design as customers' requests.
YX-01 Laser printing control system operation manual
1.Painting interface
1.1 File operation
| save |
| Save as |
| open |
| create a new file |
| Into hibernation, then click the screen to wake up. (Note: it is not off state) |
| Undo |
| reduction | Laser control card related parameter setting. |
1.2 Zoom bar
| Zoom in the contents of the view area |
| Reduce the size of the view area |
Revert to the view's original area
| Enter the system settings interface | ||
Start red light, preview the graphics. |
1.3 Toolbar
Make tools
| Click the text to select text, time, date, serial number and other new. |
| PLT vector file import |
| Barcode generation tools |
| Edit barcode attributes |
| Text content editing |
| delete |
| Edit page object list |
| Coding delete, copy, copy files by clicking on the management. |
Operating tools
| rotate to the left |
| rotate to the left |
| Move up |
| Move Downward |
| move to the left |
| move to the right |
| mobile |
| Select graphics, click copy, then click on the blank space, copy the same graphics. |
| Multiple choice graphics |
| Select all graphics |
| Fill the graphic settings |
|
Scale bar
| Height adjustment |
| Width adjustment |
| Character radian adjustment |
| Lock solution or open, corresponding to the same regulation xy, and were adjusted. |
| Adjust the accuracy of the operation |
1.4 Object list
Conversion function：When some texts overlap or a text is not in the view area，click conversion button into the area where the text is in and select the text.
1.5 Text editing sub interface
Text editing interface: Text content display, text segment list, function keys.
Text content display bar: Displays the list of input texts.
Font selection:
Font height, spacing, line spacing, coordinate center information editing:
Function keys:
: Insert fixed text.
：Insert the date text.
：Insert time text.
: Insert the serial number text.
: Insert txt file.
: Edit serial communication files.
: Edit shift information file.
:Use the line feed button to edit multi-segment text, use the text to select a line feed, and click the linefeed button.
:Cancel the newline.
:The selected text segment moves up.
:The selected text segment moves down.
:Modify the currently edited text segment
:Delete the currently edited text segment.
:Save the current edited text, and exit the current interface
：Cancel the current edit text, exit the current interface.
Keyboard input method:
：Enable English capital input.
:Enable English input.
：Enable pinyin input.
: Enable figures, punctuation input.
1.3 Font preview selection interface
Font preview selection interface, you can preview the font selection font is asfollows:
Select the file in the drawing interface, click the Font icon, enter the font library.
1.6 date editor sub-interface
The system supports multiple formats of date and time, the list box lists the date of various formats to choose from, if the user needs to set their own format, first select a column, and then click edit to modify their format.
Date Offset: How many days to offset from the current time. If the current time is 2014/7/28, enter 2
Time content will become 2014/7/30.
1.7 serial number editing sub interface
Digit： digit of serial number. For input 3，then the content of serial number is XXX. The system default is 3 digits. Original value: original value of serial number.
Step size direction：used in setting counting sequences. for example 1 represents the increment of 1，-1 represents the decrement of 1.
Current value: The value of the current to paint.
Fill: input number fill character. The default value is zero fill characters. for example, the fill is 0，current value is 1，then the painting result is 001.
Stop value：The final painting number.
Repeat: The number of repeat numbers，The default value is 0，which represents the number of painting is 1. The value is 1，which represents the number of painting is 2.
duplicate value: Representing how many times the number painting. User can set the value and restart.
Cycle: checked represent the painting is over and restart painting.
Cancel the prefix：Banning the use of filling symbols. for example, edit a three digit number 000, after checking cancel the prefix，the value of painting become 0.
1.8 Save file interface
When creating the document text, you need to tick the text box.
Click the Browse button to select the desired txt file. Currently only supports * .txt format text file.
The end of the file to start again: Coding code to the end of the file, will read the beginning of the file coding.
End of the file to stop marking: Coding to the last line of the file will not start over.
Start line: start from the current line Coding, Coding can also be used before the query for progress.
1.9 Save file interface
By selecting the top button，user can save file in the internal storage，SD card，USB storage
1.91 Code39 editing sub interface
Code39 is consist of Arabic numerals. Interface is mainly aimed at the width of the barcode height and margin Settings. The margin in the case of reverse is effective. In order to bring out, some color material need to select reverse painting.
1.92 Code128 setting sub interface
Code128 possess character set，A,B,C。A character set is for Numbers, uppercase letters, and some special characters. B character set include digital, lowercase letters, and some special characters. C only include digital character set, but compress coding width. It is recommended to use the Auto, which is optimal compression bar code.
1.93 QR setting sub interface
QR codeis consist of mask, model, error correction. Bitmap print QR code currently supported.
Cell Width： A unit takes up a square side length.
Proportional Circle： In the area of occupied by printing.
Outer Ring Number: In reverse, the outer ring takes up the number of turns.
Count： The number of painting small round.
2 Printing interface
Button Description:
Start button, there must be a text segment, click on the effective
Printing , otherwissse button action is prohibited.
:Manual printing button. In the code running state, click the code button. click once at a time.
:Control card related parameters Settings.
: get rid of the serial number count.
：Adjust the content of working conditions
：Adjust the parameters under working conditions
2.1 control card Settings interface
2.2.1Printing parameters
Jumper Speed: The galvanometer rotational speed when jumping.
Mark Speed: The galvanometer rotational speed when bright dipping
Power：Laser output power when printing. The greater the power, the deeper the dozen.
Frequency： Laser light frequency. The greater the frequency，the better The consistency of line.
Laser On Delay: Adjust system by starting movement until the end of the laser with time lag。Time is too short - line beginning place without marking。Time is too long - line at beginning of marking is too heavy.
Laser Off Delay：Adjust the system at the end of the laser, movement to the end of time。Time is too long - line ends of marking is too heavy。Time is too short - line ends place without marking。
Poloygon：Adjusting system When turn the time lag of。Time is too short - Angle becomes arc shape. Time is too long - corner will marking is too heavy。
Matrix Delay： When selecting a bitmap fonts, delay time of each printing point. the longer the time, the more heavy the marking
Set Default： Set the default printing parameters, click save
Use Default: export the default parameters had been set up
Assembly line direction: there are two set of assembly line direction At present:from left to right or from right to left. If encounter in the Y direction , it can be solved by axis transformation.
flight parameters with encoder and flight parameters (simulated flight) without encoder.
Simulation：Check represents the flight mode without encoder. Otherwise, represent external encoders
Velocity(mm/s)：Running speed of belt pulley. For example, 1000 represents running speed of 1000mm/s.
For example, the running speed of belt pulley is 20m/min, then converted to 1 s for 667 mm/s.
mm/plus： the length of Each pulse， unit is mm
Diameter： diameter of the scroll wheel.mm
Pulse Count: One revolution of the encoder pulse number.
Calculate：According to the current pulse number, diameter to calculate the product value when clicked.
Encoder Test： display the number of pulses of encoder .
2.2.3optical paramete
XY Axis transform：change the physical output.
X aixs inversion: the mirror of X axis .
Y aixs inversion： the mirror of Y axis.
size：The size range output of the output field ，70mm represents 70x70.
rect：The size of a square output for debugging.
Correction includes bucket，rhombus， trapezoid，and proportion correction.
proportion correction generally is ok in the printing machine. The method of proportion correction as follows:
1, Set the size in focal length size interface
2, Set the size of marking the square to 20mm.
3, Enter the code interface，Check the square in advanced options interface.
4, Start printing, print the square.
5, Measuring the square X, Y axis length are 25,25, respectively, then The proportion coefficient of the X axis is 20/25, The proportion coefficient of the Y axis is 20/25
1.
2.2.4Laser
Laser Settings include optical fiber and CO2 laser.
CO2 laser settings include first pulse preionization and inhibition. The first pulse suppression is in the presence of focused
IPG laser settings include startup latency and frequency limits.
2.2.5external triggering
External trigger must be checked on the software to take effect.
There are two kinds of external trigger delay model: Time delay and pulse delay. Can not choose the pulse mod without encoder
notice：1000000us is equal to 1second.
2.2.6Printing mode
Pipeline: In the mode of production or cable，the pipeline mode need to be checked.
Pipeline distance: How many mm every printing again.
start point of long character : In the case of characters long flight，the starting point of the galvanometer is in middle position coordinates. The deviation can be modified by setting the starting position.
Use Square：Only for the printing square and other text are ignored when selected. mainly used for size and the number of product testing.
3. setting interface
3.1 system setting interface
Date/time：Adjust the system time .
correction of touching screen：Correction of touch screen function. If the touch screen is not accurate, enter the calibration interface to recalibrate.
file management：The code file to delete, copy, copy by clicking on the file management to enter.
version： Check the system software version, convenient maintenance
update： Update Software.
Startup Picture： user can update their boot LOG.
4system setting.
4.1 System initialization.
1. Choose the right type of laser. setting interface-control card-laser.
2. Set the size of the optics. set-optics- Focal length size interface.
3. Detection of X, Y axis is correct or not. Editing a text”ABC”, then set correctly in optics-axis transformation
5.2 Normal flight initialization Settings
1. First, check or uncheck simulated flight and uncheck the encoder. setting-control card-marking on the fly
2. Set the size of the marking on the square. set-optics- Focal length size interface.
3. Check the square，In the printing interface of advanced options.
4. Choose the direction of the pulley，From left to right or from right to left. In the printing interface of advanced options.
5. Select normal flight. In the printing interface of advanced options.( If have a photoelectric, select external trigger)
6.printing，According to the square of the closed situation, adjust the product number or simulation speed. set-control- marking on the fly.
If square overlap is more, the accumulation and simulation speed decrease. If the square is not closed, the accumulation and simulation speed decrease
5.3 use of the long characters.
1. First, adjust simulation speed and product according to 5.2
2. Editing a text or a few piece of text. Text content can be present within the scope of the mirror, can also be outside the scope.
3. choose long flight characters In the printing in the advanced options. in the process of printing，adjust the starting position of the characters if not gush out. set-control card- Long character starting position. adjust the spacing between characters if speed is too fast.
5.4 use of meter mark.
1.First, adjust simulation speed and product according to 5.2
2.Create a text as shown below (Contains the serial number and fixed character "m"):
3.Enter the printing interface，choose long flight characters. Then select the assembly line direction.
4. Enter the set interface，pipeline mode of marking mode in control card setting. Pipeline spacing is 1000mm
5. Enter the printing interface，The status bar displays as follows:
6. Start printing.
Q: How to Install the machine
A: After receive our machine, customers do not need to install it and can use it directly.
Q: How to operate the machine? is training necessary?
A: The machine is mainly controlled by software. It's very easy, not complicated. Before shipment, we will make a simple operation manual with pictures and provide user manual of software. Generally speaking, an operator, who is not familiar with fiber laser marking machine before can still operate it very well. According to customers' requests, we can send our technician to customer' plant for machine training or customers can come to our plant for machine training if needed.
Q: What's package?
A: We have 3 layers package. For the outside, we adopt plywood case. In the middle, the machine is covered by foam, to protect the machine from shaking. For the inside layer, the machine is covered by waterproof plastic bag.
Q: What's delivery time?
A: Generally speaking, lead time is 5-7 working days after receive the payment.
Q: Can we add a protection cover?
A: Yes, we can add a protection cover if you need. We can customize the design as customers' requests.
