1500W Pipe Tube laser cutting machine Carbon Steel

Laser tube cutting machine is also called laser pipe cutting machine, laser tube cutter, laser pipe cutter, which is mainly refer to a laser cutting machine with fiber laser source for square/round/rectangular/oval metal pipes and tubes, so you can call it fiber laser tube cutting machine, fiber laser tube cutter, fiber laser pipe cutting machine, fiber laser pipe cutter. 

Advantages of Laser Tube Cutting Machine with Fiber Laser Source

 1. The fiber laser tube cutting machine can complete a variety of cutting shapes tubes, the tube surface arbitrarily complex curve graphics processing, graphics difficulty without restrictions. After cutting the tube section does not require secondary processing, it can be welded directly, greatly reducing the production period, creating enormous value for the enterprise.

2. The laser tube cutter can cut lines and holes with different diameters from different directions on the tubes&pipes and cut column and crossed lines at the end of branch pipe to meet centrifugal and non-centrifugal vertical intersection condition for branch and main pipe axis.

3. The laser pipe cutter can cut inclined with the main circular pipe.

4. The fiber laser pipe cutter can cut branch pipe intersected with the main circular pipe.

5. The fiber laser tube cutter can realize angle groove face, square hole, waist-shaped holes cutting.

6. The fiber laser pipe cutting machine adopts very thin laser beam which can be used on small part cutting and complicated patterns and reach to a polished effect.

7. Two rotary tables use double driver synchronous drive, metal tubes are not easily destroyed when processing, with high precision and high processing efficiency.

Features of Laser Tube Cutting Machine with Fiber Laser Source 

1. The fiber laser tube cutter machine bed will go through 600℃ heat treatment, 24 hours cooling in the oven, 8 meters gantry milling, accurate CO2 protection welding to make sure 20 years usage without deformation.With the above actions, all bad results will be get rid of. The cutting precision can reach ±0.02mm. 

2. The fiber laser tube cutting machine adopts China best brand Raycus or Germany IPG fiber laser generator to get the best cutting quality.

3. The rotary device adopts multiple automatically segmented feeding method, fast and precision, easy for clamping to reduce the distance from laser processing head to the pipe ends, reducing the material head waste, improve material utilization. 

4.For all types of large diameter tolerances, fuzzy boundaries, stepping device selectively gripping and pre-set torque to ensure the holder is not easy deformation of thin-walled tube.

Fiber Laser Tube Cutting Machine Applications Metal tube/pipe diameter: ≤200mm.Metal tube/pipe cutting thickness: ≤8mm (Mild Steel).Metal tube/pipe type: round, square, triangle, rectangle, oval, circular tubes and more other special tubes, etc. 

Product Advantages:

1. Stable structure, good rigidity, saving time for loading and unloading, and high speed.

2. The cutting edge quality is good.

3. The cutting material has small deformation, smooth and beautiful appearance.

4. Fast cutting speed, no noise, clean and environmentally friendly.

5.  The components adopt Taiwan original branch line guide roller and accessories, which are stable and reliable.

6. Square tube welding bed design, after stress relief annealing, the structure is more stable, electricity saving and environmental protection.

7. The product has low energy consumption and low use cost; the equipment has high stability, simple and convenient maintenance, and low maintenance cost.

Datas：